-
Phone
15895689611
- Address
Product Categories
- Aseptic blowing, filling and spinning machine
- Carbonated beverage blowing, filling and spinning machine
- Bottled water blowing, filling and spinning machine
- homogenizer
- Hot filling, blowing, filling and spinning machine
- Non beverage blowing, filling and spinning machine
- Mixer
- Small bottle blowing machine
- Large packaging water blowing, filling and spinning machine
- Large bottle blowing machine
- Ultra clean blowing, filling and spinning machine
- Oversized bottle blowing machine
Suzhou Xinsute Packaging Co., Ltd
homogenizer
NegotiableUpdate on 01/07
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Homogenizers are mainly used in the field of food processing, and their core product is a fully enclosed large horizontal high-pressure homogenizer (liquid controlled pressure regulating type). This equipment homogenizes materials through high pressure and shear force, and is suitable for the pretreatment of liquid foods such as dairy products, fruit juice, coffee, etc.
Product Details
12T/30homogenizer
homogenizerMainly used in the field of food processing, its core product is fully enclosed large horizontal high pressurehomogenizer(Liquid controlled pressure regulating type), this equipment homogenizes materials through high pressure and shear force, suitable for pre-treatment of liquid foods such as dairy products, fruit juice, coffee, etc.
Product Features:
Fully enclosed design: Adopting a fully enclosed structure to avoid material contamination and operator exposure to high temperature and high pressure environments.
Hydraulic control pressure regulating system: By adjusting pressure parameters through a hydraulic control system, the homogenization effect is ensured to be stable.
Application scope: Suitable for UHT sterilization pretreatment, can handle high viscosity materials (such as yogurt, jam, etc.).
Often used in conjunction with UHT sterilization machines, sterile filling machines, and other equipment to form a complete food processing production line.
Note: For non-standard equipment selection, specific model parameters are mentioned. It is recommended to directly contact the manufacturer for detailed technical specifications.
1. Structural Description of SRH10000-40 and SRH12000-30
1.1 Drive: Siemens motor, two-stage variable speed; First stage belt pulley, second stage curved arm gear symmetrical transmission; Detachable slide, special alloy bearing, double-sided rolling bearings, smooth and low-noise.
1.2 Lubrication: Splash and jet type secondary lubrication coexist, and the Xunjie cooler GLC-1-3-1.1KW is equipped to ensure that the oil temperature is below 60 ℃, which is safe and reliable.
1.3 Main pump body: Three way design, with a radial self sealing cover and no external leakage.
1.4 Plunger: 4 plungers, square plunger sealing component, code X4310.
1.5 Unidirectional valves: 4 sets of cone valves for inlet and outlet, totaling 8 sets.
1.6 Homogenization valve: The first stage high-pressure valve is equipped with a three piece set (high-pressure valve core, seat, collision ring) flat valve, and the second stage low-pressure valve is equipped with a two-piece set flat valve.
1.7 Pressure Monitoring: One German imported assembled diaphragm pressure gauge is used to monitor high and low pressure.
1.8 Pressure regulation: Stepless manual pressure regulation device, two-stage.
1.9 The buffer pipes for incoming and outgoing materials shall be handled by the demander according to convention.
1.10 Install one stainless steel self coupling pressure reducing starter cabinet.
2. Technical parameters
| Specification Model | SRH10000-40 | SRH12000-30 |
| Rated flow (50Hz power supply) | ≥10000l/h | ≥12000l/h |
| Maximum work pressure (test pressure) | 41MPa | 28 MPa |
| Rated working pressure | ≤32MPa | ≤24MPa |
| feed pressure | 0.2-0.3MPa | |
| Adapt to liquid temperature/viscosity | 150℃/≤1000CP | |
| Configure motor power (380V/50Hz) | 132 KW | 110 KW |
| Rated required power | 30MPa / 96KW | 20MPa / 64KW |
| Interface diameter | Inlet and outlet pipe joint RD70 * 1/6” | |
| Overall dimensions | 1.8*1.5*1.5m | 1.8*1.5*1.5m |
| Total weight | 5500Kg | 5000Kg |
| Lubricating oil (food grade) | N68 or Mobil SHC626 | |
| Radome Material | 1Cr18Ni9Ti | |
| Sealing ring material | X4310 (hemp fiber and ultra-high polymer) or Teflon | |
| pressure gauge | PT124G-285 diaphragm type | |
| Machine frame structure material | casting | |
| other | Level 1 (High Voltage))≤32Mpa Secondary (low voltage)≤10Mpa | Level 1 (High Voltage))≤24Mpa Secondary (low voltage)≤10Mpa |
3. Other technical conditions
Motor: Siemens Motor (China) Co., Ltd.
Drive assembly: Box HT20-40, crankshaft, connecting rod, and gear materials are made of special alloy ductile iron (Shenlu special) suitable for low-speed and heavy-duty operation. The bearing shell is usually not replaced for life.
Piston: Fourth generation special steel (PH type), reaching the international advanced level.
Check valve: Fourth generation special steel (GrMoFr alloy), wear-resistant and impact resistant, superior to Satellite, reaching international advanced level.
The lifespan of plungers and one-way valves is related to the presence of hard particles in the liquid material and cooling water, typically exceeding 6000-10000 hours for dairy products and 3000-6000 hours for others. Need to replace and grind.
Pump body valve body: 1Cr18Ni9Ti stainless steel.
Sealing element: Fourth generation sealing material, code X4310 and ultra-high polymer, resistant to high temperature of 150 ℃.
Homogenization valve: third-generation special alloy.
The above structure and materials,homogenizerIt has the characteristics of sufficient flow, stable pressure, good homogenization effect, low noise, long service life of vulnerable parts, and is worry free, labor-saving, and cost-effective in use.
Similar Product Recommend