Solid preparation production line

NegotiableUpdate on 01/07

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The working principle of the solid preparation production line is that clean hot air is distributed into the bed through the valve plate, and the wet material entering from the feeder is boiled by the hot air. Due to the extensive contact between hot air and materials, the process of heat and mass transfer is increased, so it can be dried in a relatively short time.

Product Details

Solid preparation production lineofOverview

Boiling dryer, also known as fluidized bed, passes through30The use and improvement over the years have increasingly demonstrated its important role in pharmaceuticals, chemicals, food, and grain processing. It consists of an air filter, a fluidized bed main unit, a cyclone separator, a bag filter, a high-pressure centrifugal fan, and an operation console. Due to the different properties of dry materials, when matching dust removal equipment, it can be carried out according to importance. Cyclone separators, bag filters, or one of them can be selected simultaneously. Generally speaking, for materials with a high specific gravity, only snow is selected using a cyclone separator. Materials with lighter specific gravity need to be matched with bag filters and equipped with pneumatic feeding devices for selection. This device has two operating modes: continuous and intermittent.

Horizontal boiling dryerofworking principle

Clean hot air is distributed into the bed through the valve plate, and the wet material entering from the feeder is boiled by the hot air. Due to the extensive contact between hot air and materials, the process of heat and mass transfer is increased, so it can be dried in a relatively short time. If using a continuous type, the material enters from one end of the bed, undergoes boiling and drying for several seconds to minutes, and automatically flows out from the other end of the bed. This devicePerform negative pressure operation.

Product Usage

Drying operations for pharmaceuticals, chemical raw materials, food, grain processing, and feed. as:Drying and dehumidification of raw materials, tablet granules, traditional Chinese medicine granules, health foods, beverage granules, corn germ feed, plastic resins, citric acid, and other granular materials. The particle size of the applicable material is generally0.1-6mm, optimal particle size0.5-3mm.

Adapt to materials

Drying operations for pharmaceuticals, chemical raw materials, food, grain processing, and feed. For example, drying and dehumidification of raw materials, tablet granules, traditional Chinese medicine granules, health foods, beverage granules, corn germ, feed, plastic resins, citric acid, and other powdered materials. The applicable material particle size is generally 0.1-6mm, and it is recommended to have a particle size of 0.5-3mm.

Technical Specifications

structural diagram

固体制剂生产线

Installation Instructions

Each device should be placed flat, fixed with foot screws, and all components should be well sealed.

The fan can be placed outdoors or in a self built soundproof room. The layout can be adjusted according to specific circumstances.

Note:

1、 Feeding method: 1. Star shaped feeding; 2. Star shaped feeding and pneumatic conveying are used together; 3. Belt conveyor; 4. User defined.

2、 Automated production can be achieved.

3、 In addition to the above models, special designs can be made for users.

4、 According to different materials, the fan power also varies.