Scraper fully automatic self-cleaning filter/machine

NegotiableUpdate on 01/09

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Stainless steel self-cleaning filter, scraper fully automatic self-cleaning filter, water or other liquids enter the interior of the equipment through the inlet of the fully automatic self-cleaning filter, intercept the required filtering impurities in the water or other liquids through the filter screen, and discharge the filtered water or other liquids through the outlet of the fully automatic self-cleaning filter.

Product Details

Scraper fully automatic self-cleaning filterProduct Introduction

Water or other liquids enter the interior of the equipment through the inlet of the fully automatic self-cleaning filter, and the required filtering impurities in the water or other liquids are intercepted by the filter screen. The filtered water or other liquids are discharged through the outlet of the fully automatic self-cleaning filter, and the impurities remain on the inside of the filter screen. As the impurities accumulate, the pressure difference between the inlet and outlet of the filter will increase accordingly. This value is detected by the pressure difference switch of the equipment. When this value reaches the preset value of the pressure difference switch, the pressure difference switch will transmit a signal to the electrical control cabinet through a transmission line, and the electrical control cabinet will then distribute the signal to the cleaning component (scraper, rotary brush or suction port) and the drain valve. At this time, the cleaning component will clean the inner surface of the filter screen, and then the drain valve will detect it. Drain impurities and some liquids from the interior of the equipment, The time control of the electrical control cabinet of the equipment can be set according to the start-up interval of the pressure difference. Afterwards, the cleaning cycle of the equipment can be controlled through dual control of time and pressure difference, thus ensuring the cleaning effect of the equipment and the normal operation of the system.

Stainless steel self-cleaning filterTechnical Specifications

Processing water volume: 45~280m3/h

Work pressure: 0.1~2.0Mpa

Working water temperature: ≤ 95 ℃

Filtering accuracy range: 50~3000 μ m

Cleaning time: 10~60 seconds

Control mode: differential pressure, time, and manual

Electric control mode: AC three-phase 380V/50Hz

Control interface: digital display, knob, switch

Filter type: wedge-shaped strip mesh, woven sintered mesh

Shell material: Q235B, 304, 316, 316L

Filter material: 304, 316, 316L

Cleaning component materials: 304, 316, 316L

Note: The above is a standard configuration, and can be customized if there are special requirements

model	pipe diameter	Flow rate t/h	Filter area m ²	drain valve	Cleaning water volume kg	Motor power kw	Weight kg
YQ-Z02	DN50	25-35	1200	25	5-10	0.18	~85
YQ-Z03	DN80	40-50	2700	25	8-25	0.18	~90
YQ-Z04	DN100	50-80	3000	50	20-45	0.25	~105
YQ-Z05	DN125	80-115	4200	50	40-60	0.25	~130
YQ-Z06	DN150	115-180	4900	50	80-150	0.37	~230
YQ-Z08	DN200	180-285	6000	50	150-180	0.55	~250
YQ-Z10	DN250	300-450	7600	50	150-230	0.55	~350
YQ-Z12	DN300	450-620	11700	50	200-280	0.55	~415
YQ-Z14	DN350	650-870	16000	80	300-370	0.75	~630
YQ-Z16	DN400	870-1150	20000	80	300-400	0.75	~780
YQ-Z18	DN450	1150-1460	24900	100	320-420	1.1	~930
YQ-Z20	DN500	1500-1800	32900	100	400-500	1.1	~970
YQ-Z24	DN600	1800-2270	41650	100	450-550	2.2	~1060
YQ-Z28	DN700	2270-2800	78600	125	500-630	2.2	~1250

Scraper fully automatic self-cleaning filter