Rotary granulator

The rotary granulator uses a set of rotating grinding blades to inject the wet material produced in the previous process into the stainless steel sieve holes of the ring grinding blade, thereby producing cylindrical wet particles for shot blasting in the next process. This device can obtain particles of different sizes by replacing the stainless steel sieve cylinder. Wet particles can also be made according to the size of the material and the required spherical particles.

　　Rotary granulator:This machine uses a set of rotating grinding blades to inject the wet material produced in the previous process into the stainless steel sieve holes of the ring grinding blade, thereby producing cylindrical wet particles for shot blasting in the next process. This device can obtain particles of different sizes by replacing the stainless steel sieve cylinder. Wetting particles can also be adjusted based on the material and the required size of spherical particles.

　　Rotary granulator:Product composition and principle

Main body: The body is an independent rectangular cylinder, with a closed bearing seat connected to the powder hopper, and the powder hopper extends towards the body. Particle manufacturing device: The rotating drum is horizontally placed under the powder hopper, with bearing supports at the front and rear. It rotates in a reverse direction through the transmission of gears. The front bearing cover on the end face is movable. When assembling and disassembling, simply unscrew one wing nut, and the bearing cover and rotating drum can be extracted. The two ends of the placing drum are made with convex square rings.

Gearbox: Adopting worm gear transmission, the gearbox can store oil, and there is a sight glass on the gearbox to observe the operation and oil storage. The outer end of the worm gear is equipped with an eccentric shaft, which drives the rack to move back and forth. Screen clamp: The device is made of steel pipes on both sides of the rotating drum, with a long groove in the middle. The two ends of the screen are embedded in the groove. The screen is wrapped around the outer circle of the rotating drum by rotating the flower shaped handwheel, which is supported by gears and can be adjusted for tightness.