Multi functional tofu residue flash dryer

NegotiableUpdate on 01/17

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Principle of multifunctional tofu residue flash drying machine: Hot air enters the mixing and crushing drying chamber from the bottom of the dryer through the inlet pipe at a suitable spraying speed, generating strong shearing, blowing, and rotating effects on the material. As a result, the material is subjected to centrifugation, shearing, collision and friction, and is atomized, enhancing mass and heat transfer.

Product Details

　　Multi functional tofu residue flash dryerThe spiral feeder enters the dryer, and under the strong action of the high-speed rotating mixer, the material is dispersed by impact, friction, and shear. The block shaped material is quickly crushed, fully contacted with hot air, heated, and dried. After dehydration, the dried soybean residue rises with the hot air, and the grading ring intercepts large particles. Small particles are discharged from the center of the ring outside the dryer and are recovered by the cyclone separator. Undried or large materials are thrown towards the wall by centrifugal force and fall back to the bottom for crushing and drying. Due to the high air velocity in the drying room and the short residence time of materials, it achieves high efficiency, speed, small equipment, and large output. Installing ceramic rings and swirl plates on the upper part of the drying chamber can control the particle size and temperature of the outlet material to meet the requirements of different final moisture particle sizes for different materials. Principle of dryer: Hot air enters the mixing and crushing drying chamber from the bottom of the dryer through the inlet pipe at a suitable spraying speed, generating strong shearing, blowing, and rotating effects on the material. As a result, the material is subjected to centrifugation, shearing, collision, and friction, and is atomized, enhancing mass and heat transfer.

　　Multi functional tofu residue flash dryerThe dry gas enters the bottom of the dryer, generating a strong rotating airflow and exerting a strong flushing effect on the material on the wall, eliminating the phenomenon of wall sticking. In the low temperature zone of the dryer, the heat sensitive material does not come into direct contact with the hot surface and is equipped with a special device to solve the problem of coking and discoloration of heat sensitive materials. Due to the material being subjected to centrifugation, shearing, collision, and friction, it is finely dispersed into a highly dispersed state, and the high velocity between the solid and gas phases enhances mass and heat transfer, resulting in high production intensity of the machine. With the continuous improvement of technological level and mechanical manufacturing capability, more and more automation and mechanization methods are gradually replacing manual processing with the advantages of high yield, high efficiency, time-saving and energy saving. It cannot be denied that the level of mechanical manufacturing has brought great convenience, changing the tedious and labor-intensive manual operation mode that consumes water and electricity, greatly reducing processing time, and significantly increasing production.