Corn starch airflow dryer

Product Overview

Corn starch airflow dryerIt is a large-scale drying equipment that adopts the principle of instant drying, using the rapid movement of heat carrying air to drive wet materials and suspend them in hot air. This strengthens the entire drying process, improves the rate of heat and mass transfer, and almost all non bound moisture can be removed from the materials dried by airflow (for example, the moisture content of starch and other materials in the feed is ≤ 40%, and the finished product discharge can be 13.5%). The dried materials will not cause deterioration, and users can achieve high economic benefits in a short period of time.

Application scope:

This type of equipment is suitable for a variety of materials, in addition to the materials mentioned in the basic type, there are also: A.B.C. intermediates, A.B.S resins A.S.C、 White carbon black, benzothiazolone, tea meal, oxalic acid catalyst, accelerator m.d.m, catalyst, precipitated carbon powder, acetaminophen sulfonamide, Doraemon, phthalic acid, diethylphenylammonium, titanium oxide, activated carbon, sodium fluorosilicate, fluorite ore, by-product ammonium sulfate, silica gel powder, synthetic resin, calcium sulfonate, polypropylene resin, sodium pyrosilicate, furfural acid coffee grounds, oral grape bran, sodium sulfate, sulfide ore, phosphate ore powder, orchid BB, PVC, molten phosphate fertilizer, tetracycline, ferric oxide, calcium carbonate, ilmenite, copper ore, potato flour, tail coal, stearic acid corn protein, pharmaceuticals, agents, iron oxide, wine residue, etc.

Corn starch airflow dryerWorking Principle:

A fan with dispersing function is particularly suitable for airflow drying operations of thermal sensitive materials. The high-speed rotating fan impeller can break down wet or even clumped materials until they are dispersed. During the dispersion process, the material is stirred, mixed, and then flows parallel to the hot air flow. This type of equipment is suitable for drying filter cake clumps, but it is also a material with surface moisture content<40%. If the processing capacity is large or the finished product requires drying to below 15%, secondary airflow drying can be used. When the moisture content of the material exceeds 40%. But when it is less than 60%, it is difficult to feed, and a mixer should be used to reduce the moisture content of the material by mixing dry materials. At this time, the total output of the drying equipment will decrease significantly, which is not cost-effective economically. Therefore, users should first use mechanical methods (centrifugal dehydration or pressure filtration) to minimize the moisture content of the feed as much as possible to ensure the smooth progress of the drying operation.

Product Features

Suitable for drying and dehumidifying powdered materials in industries such as pharmaceuticals, chemicals, food, building materials, plastics, etc., such as starch, fish meal, salt, distiller's grains, feed, gluten, plastic resin, mineral powder, coal powder, sugar chloric acid, A · S · C benzoic acid, 2.3 · acid, polypropylene, sodium sulfate, sodium metabisulfite and other materials.

Our company provides external consultation on airflow drying equipment and designs and manufactures non-standard products on behalf of othersAirflow dryer.

flow chart:

Technical Specifications