Circular vacuum dryer factory

A circular vacuum dryer factory heats and dries the material to be dried under vacuum conditions. It uses a vacuum pump to extract air and moisture to create a vacuum state in the working chamber, accelerating the drying rate and improving work efficiency.

　　Circular vacuum dryer factory

Suitable for vacuum drying and mixing of powder and granular materials in industries such as medicine, food, and chemical engineering. Especially suitable for materials that cannot accept high temperature sensitivity and require solvents and toxic substances, materials with extremely low residual volatile content, materials that are prone to oxidation, hazardous materials, and materials with requirements for crystal shape. Designed, developed, produced, installed, and serviced in strict accordance with national GMP requirements, while strictly implementing ISO9001 quality system standards to ensure product quality. We continuously innovate and transform in the development and research of drying equipment, and design and manufacture a series of energy-saving products with advanced processes. We have developed over forty drying, granulation, mixing, and dust removal series according to market demand. Our products are widely used for drying and dehumidifying industrial raw materials or products in industries such as pharmaceuticals, chemicals, food, and light industry, and have received high praise from users.

　　

　　Circular vacuum dryer factory

Principle:

1. Heat energy (such as hot water, low-pressure steam, or thermal oil) is introduced into a sealed interlayer, and the heat is transferred to the dried material through the inner shell.

2. Under the power drive, the tank rotates slowly, and the materials inside the tank continuously mix, thereby achieving the purpose of strengthening drying.

3. The material is in a vacuum state, and the decrease in vapor pressure causes the water (solvent) on the surface of the material to reach saturation and evaporate, and is promptly discharged and recovered by a vacuum pump. The water (solvent) inside the material continuously permeates, evaporates, and is discharged from the surface, achieving the drying goal in a short period of time.

Features:

When oil is heated Adopting automatic constant temperature control Can dry biochemical products

2. With mineral raw materials, the temperature can be between 20-160oC.

3. High thermal efficiency, more than twice as high as a typical oven.

4. Indirect heating The material will not be contaminated and meets the requirements of GMP. The equipment maintenance operation is simple and easy to clean.

5. Recommended process placement demonstration solvent recovery process placement.