Ankrui embedded fire emergency lighting fixture E3W-A631 emergency time greater than 90 minutes

1. Overview

The fire emergency lighting and evacuation indication system, in conjunction with the fire alarm controller, can quickly analyze the wind direction, nearby exits, fire trend, and crowd density in critical moments, provide safe evacuation path instructions, intelligently turn on the direction of fire emergency sign lights and emergency lighting, help the people inside the building choose the escape route in real time, guide the safe escape direction, and maximize the personal safety of the masses, solving the safety concerns of various businesses. This system is mainly used in airports, rail transit, tunnels, passenger hubs, hospitals, schools, sports centers, exhibition halls, star rated hotels, commercial buildings and other places.

2. Application location

1) Office buildings (business offices, office buildings, etc.)

2) Commercial buildings (shopping malls, financial institution buildings, etc.)

3) Tourist buildings (hotels, restaurants, entertainment venues, etc.)

4) Science, education, cultural and health buildings (cultural, educational, scientific research, medical and health, sports buildings, etc.)

5) Communication buildings (postal, telecommunications, broadcasting, television, data centers, etc.)

6) Transportation buildings (airports, stations, dock buildings, etc.)

3. Structure

The centralized power supply and centralized control type fire emergency lighting and evacuation indication system adopts a four layer network structure of emergency lighting controller (host), centralized power supply, distribution device, and lighting fixtures. It has a wide range of applications and can meet various on-site environments, facilitating regional management. The lighting fixtures and distribution devices use two bus communication, and the monitors and centralized power supply and distribution devices use CAN bus communication, meeting the requirements of high real-time communication.4. Function

1) Login and registration functionsDouble click to open the software shown in the figure and enter the monitoring software. After the software self-test is completed, enter the following:Login: Click on the top left corner to select login, password: 0000 (the Numlock key will be unlocked after the system is powered on again, press off and then enter the number).Registration: If you need to register, you can click on the "Register All" function.After clicking on registration, check the registration status. If the lamps with communication interruption in the fault column are mostly from the same distribution, then perform a "single registration" for this distribution.

2) Under normal circumstances, the emergency start and reset functions of this system are connected to the fire alarm host through switch input or RS232 communication. In the event of a fire alarm, this system will automatically start the emergency state (with the indicator light constantly on and the lighting on). If you manually simulate the start-up of emergency and reset, please refer to the following steps: Emergency start-up: Select "Emergency start-up" in the "Management" toolbar, and all devices under this system will enter an emergency stateEmergency stop or reset: If "Management" selects "Emergency stop" or "Reset", the system will stop the emergency:The system has monthly and annual inspection functions. The monthly inspection system will automatically enter an emergency state for 30 seconds and reset automatically, while the annual inspection will enter an emergency state for 30 minutes and reset automatically. During the process, you can choose to manually turn off the reset. 3) Equipment monitoring display function: This system can display the position and real-time status of each lamp in the "layout view" plane, as shown in the following figure:The specific working status of centralized power supply and distributed power can be displayed in the "CAN device":5. Equipment selection

1) Emergency lighting controller

2) Emergency lighting centralized power supply

3) Emergency lighting distribution device

4) Monitoring module