Amino sulfonic acid vibrating fluidized bed dryer

NegotiableUpdate on 01/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The material of the aminosulfonic acid vibrating fluidized bed dryer enters the machine from the feed inlet. Under the action of vibration force, the material is thrown along the horizontal fluidized bed and continuously moves forward. The hot air passes through the fluidized bed and exchanges heat with the wet material. The wet air is removed by the cyclone separator and discharged through the exhaust. The dried material is discharged through the exhaust inlet.

Product Details

Product Overview

Amino sulfonic acid vibrating fluidized bed dryerThe material enters the machine through the feeding port, and under the action of vibration force, the material is thrown forward continuously in the horizontal direction. The hot air passes through the fluidized bed and exchanges heat with the wet material. The wet air is removed by the cyclone separator and discharged through the exhaust port, while the dry material is discharged through the exhaust port. Widely applicable to the drying, cooling, and humidification of powder and granular materials in industries such as chemical, light industry, pharmaceuticals, food, plastics, grain and oil, slag, salt production, and sugar.

Performance Characteristics
The vibration source is driven by a vibration motor, which runs smoothly, is easy to maintain, has low noise, long service life, and is easy to maintain.
High thermal efficiency, saving more than 30% energy compared to general drying devices. The temperature distribution of the bed layer is uniform, with no local overheating phenomenon, uniform fluidization, and wusijiao phenomenon.
Good adjustability and wide adaptability The thickness of the material layer, the speed of movement inside the machine, and the uniform change of full amplitude can be infinitely adjusted.
Has minimal damage to the surface of the material and can be used for drying fragile materials; Irregular material particles do not affect the working effect.
Adopting a fully enclosed structure effectively prevents contamination of the working environment between materials and air.
When used for mass production of high moisture materials, multiple units can be connected in series to meet user requirements (typical materials: such as polyacrylamide, etc.).

Technical parameter table:

model	Fluidized bed area m2	Inlet air temperature ℃	Air outlet temperature ℃	Water evaporation capacity Kg/h	Vibration Motor
model	Fluidized bed area m2	Inlet air temperature ℃	Air outlet temperature ℃	Water evaporation capacity Kg/h	model	Power KW
ZLG 3 × 0.30	0.9	70~140	40~70	20~35	YZS8-6	0.75×2
ZLG 4.5 × 0.30	1.35			35~50	YZS10-6	0.75×2
ZLG 4.5 × 0.45	2.025			50~70	YZS15-6	1.1×2
ZLG 4.5 × 0.60	2.7			70~90	YZS15-6	1.1×2
ZLG 6 × 0.45	2.7			80~100	YZS15-6	1.1×2
ZLG 6 × 0.60	3.6			100~130	YZS20-6	1.5×2
ZLG6×0.75	4.5			120~170	YZS20-6	1.5×2
ZLG 6 × 0.9	5.4			140~170	YZS30-6	2.2×2
ZLG 7.5 × 0.6	4.5			130~150	YZS30-6	2.2×2
ZLG 7.5 × 0.75	5.625			150~180	YZS40-6	3.0×2
ZLG7.5×0.9	6.75			160~210	YZS40-6	3.0×2
ZLG 7.5 × 1.2	9.0			200~280	YZS50-6	3.7×2
ZLG 7.5 × 1.5	11.25			230~330	YZS50-6	3.7×2
ZLG 8 × 1.8	14.4			290~420	YZS75-6	5.5×2

Note: Some parameters may be adjusted according to different materials during design, and the design shall prevail.