Mixing granulatorSuitable for crushing and organizing particles in industries such as Chinese and Western medicine, food, chemical pigments, and feed. The particle shapes and specifications obtained through various granulation processes and equipment vary. After granulation, the particles are cut by the high-speed rotating blade combination of this machine and discharged through the mesh plate to obtain particles with basically the same shape and specifications. All parts of the granulator are made of stainless steel, with polished surfaces, making assembly, disassembly, and cleaning very convenient. After granulation is completed, it is required to use oily materials to press into the mold holes to ensure that they are not corroded. The maintenance of carbon steel ring molds should be more careful.

Characteristics of high-efficiency wet mixing granulator for food granules: This machine adopts a horizontal cylindrical structure with a reasonable structure. Inflatable sealed drive shaft, can be switched to water during cleaning. Fluidized granulation results in approximately spherical particles with good flowability. Reduce adhesive by 25% compared to traditional processes and shorten drying time. Each batch is dry mixed for 2 minutes and granulated for 1-4 minutes, resulting in 4-5 times higher efficiency compared to traditional processes. Completed in the same sealed container, dry mixing wet mixing granulation, process reduction, in compliance with GMP standards. The entire operation has strict safety protection measures.

Working principle: The wet mixing granulator mixes the powder material and binder in a cylindrical or conical container, thoroughly mixed into wet soft material by the bottom mixing paddle, and then cut into uniform wet particles by the high-speed crushing paddle placed on the side. When working, several formulas of materials are added to the working container at once, mixed and mixed, and then injected with adhesive, or a formula of materials and adhesive are added to the working container at once, mixed by a stirring blade to make soft materials, and then cut into particles by a cutting cutter. The high-efficiency wet mixing granulator is driven by a dual speed motor, which controls the solubility of the adhesive, the speed of the cutter, and the crushing time to obtain particles of different sizes. This ensures that the quality of the produced drugs reaches a high level of repeatability in terms of particle size distribution, density, flowability, etc. between batches, and is automatically produced according to the same program to ensure the granulation quality of the product.