The use of alarm electronic scales usually involves several key steps, and the basic process is as follows:
1、 Basic operating steps
Installation and startup
Place the electronic scale inStable and levelOn the countertop, avoid vibration or tilting.
Insert the battery or connect the power, pressON buttonPower on (some scales require long press to start).
Unit selection
pressUNIT keySwitch weighing units (such as grams/g, kilograms/kg, pounds/lb, etc.).
Calibration (after first use or movement)
In the unloaded state, pressCAL key(or long press a specific combination of keys) Enter calibration mode.
Place standard weights (such as 500g, 1kg) according to the prompts, and automatically exit after calibration is completed.
2、 Alarm function settings
1. Overweight alarm (upper limit alarm)
pressALARM "or" SET "keyEnter the setup mode.
Enter the presetUpper limit weight valueWhen the weight exceeds 500g, the scale will emit a buzzing sound or flash a warning.
2. Under weight alarm (lower limit alarm)
Similar to upper limit setting, inputMinimum allowable weight valueIf the value is lower than this, an alarm will be triggered.
3. Target alarm (quantitative reminder)
Set a target weight (such as 100g), and an automatic alarm will sound when the weight reaches this value (commonly used for packaging or formula ingredients).