-
E-mail
caobin0523@126.com
-
Phone
13641834824
-
Address
No. 3802 Shengang Road, Songjiang District, Shanghai
Shanghai Yangqing Filtration Technology Co., Ltd
The fully automatic self-cleaning filter has been packaged
Date: 2024-10-21Read: 8
I am glad to cooperate with Mr. Wang from Shandong. We have already tested and packaged the fully automatic self-cleaning filter you ordered, and will arrange for our company's logistics to ship it together
The water or other liquid in the fully automatic self-cleaning filter enters the interior of the equipment through the inlet of the fully automatic self-cleaning filter, and the required filtering impurities in the water or other liquid are intercepted by the filter screen. The filtered water or other liquid is discharged through the outlet of the fully automatic self-cleaning filter, and the impurities are retained inside the filter screen. As the impurities accumulate, the pressure difference between the inlet and outlet of the filter will increase accordingly. This value is detected by the pressure difference switch of the equipment. When this value reaches the preset value of the pressure difference switch, the pressure difference switch will transmit a signal to the electrical control cabinet through the transmission line, and the electrical control cabinet will then split the signal to the cleaning component (scraper, rotary brush or suction port) and the drain valve. At this time, the cleaning component will clean the inner surface of the filter screen. Then, impurities and some liquids are discharged from the inside of the equipment through the drain valve, The time control of the electrical control cabinet of the equipment can be set according to the start-up interval of the pressure difference. Afterwards, the cleaning cycle of the equipment can be controlled through dual control of time and pressure difference, thus ensuring the cleaning effect of the equipment and the normal operation of the system.
Technical parameters of stainless steel self-cleaning filter
Processing water volume: 45~280m3/h
Work pressure: 0.1~2.0Mpa
Working water temperature: ≤ 95 ℃
Filtering accuracy range: 50~3000 μ m
Cleaning time: 10~60 seconds
Control mode: differential pressure, time, and manual
Electric control mode: AC three-phase 380V/50Hz
Control interface: digital display, knob, switch
Filter type: wedge-shaped strip mesh, woven sintered mesh
Shell material: Q235B, 304, 316, 316L
Filter material: 304, 316, 316L
Cleaning component materials: 304, 316, 316L
Last Article: Batch delivery of mobile filters! Sales elites were commended
Next Article: What are the cover structures on bag filters?