3000Kg/h sodium butyrate centrifugal spray drying tower

Sodium butyrate centrifugal spray dryer (from the feeding of the dryer to the exhaust for dust removal, including spray dryer, blower, induced draft fan, dust remover, etc., excluding hot air heater, provided by Party A)

Feed rate: ≤ 3000Kg/h

Feed temperature: 50-90 ℃ Discharge temperature: ≤ 50 ℃

Material moisture content (w): ≤ 41.0% Product moisture content (w): ≤ 1.0%

Product particle size: 900 μ m Test sieve 100%

250 μ m test sieve ≥ 85%

Economic hot air temperature: ≤ 110 ℃ (if higher temperature is necessary, negotiable)

Calculate the air volume based on an air moisture content of ≤ 1.0g/m3, and recycle it after dehydration.

The drying system must be sealed to avoid air (odor) leakage and environmental pollution.

Spray dryer is a device that can complete drying and granulation at the same time. According to the process requirements, the pressure, flow rate, and nozzle size of the material liquid pump can be adjusted to obtain the required spherical particles in a certain size ratio. Spray dryer is a kind of continuous atmospheric pressure dryer. Spray the liquid material into a mist using special equipment, and dry it by contacting it with hot air. Used for drying some heat sensitive liquids, suspensions, and viscous liquids, as well as for drying fuels, intermediates, soap powders, and inorganic salts. Generally, it includes electric blast drying oven, vacuum drying oven, high-speed centrifugal spray dryer and sterile spray dryer. The working principle, basic classification, characteristics, technical parameters, application range and operation process of spray dryer are introduced in detail.