Today, the Wuxi customer placed another order for the second setKJY-50 square hollow blade dryerAlready shipped. Our company has already installed and started up the equipment for trial operation before shipment, and everything is normal. The material dried by the customer is sludge. The customer has already ordered a set of hollow blade dryers from our company in the early stage, which were shipped in mid August and are now in normal production. Therefore, the customer is very satisfied with the quality and service of our equipment, and has once again cooperated with our company to order a second set of hollow blade dryers.

The hollow blade dryer produced by our companyIn terms of design, two hollow shafts are used in conjunction with a hollow stirring blade welded to the shaft as the core. The blade shape is a wedge-shaped hollow semicircle that can be filled with heating medium. In addition to stirring, the propeller blade is also the heat transfer element of the equipment. Two of the main heat transfer surfaces, when in contact with the material, prevent dead corners by scraping the material with a scraper, while continuously updating the heat transfer surface to enhance heat transfer. Due to the precise design of the equipment, there are strict requirements for the arrangement of the blades and the dimensions of each part. In addition to the blades in the feeding area, drying area, and discharging area, auxiliary mechanisms are also installed to ensure stable overall operation and uniform drying of the equipment, and to make the residence time controllable.